By Jett NG | 08 September 2021 | 0 Comments

 Robot production in small batches is a trend |prototype machining services|easoar-soon.com

 Robot production in small batches is a trend |prototype machining services|easoar-soon.com

 
 
 
For example, some robots are mainly plastic, and the outer shell of the robot is usually plastic.
 
The robot has few metal parts to support it, except for some circuit boards that are fixed to the robot.
 
Therefore, for these robots with plastic shells, only CNC processing into handboards.
 
With the development of 3D printing technology, more and more robots use 3D printing to manufacture sample.
 
For industrial inspection robot handboards and small and medium batches, users also prefer to use embedded devices with real-time operating systems.
 
The manipulator board helps manufacturing engineers and systems integrators quickly build high-speed, real-time robots for product classification, assembly verification, and packaging inspection.
 
Complete the robot hand plate, about a few sets, preliminary inspection of product appearance and structural hand plate design.
 
If problems are found, further entry into the market will be made.
 
The robot hand plate can be quickly made by 3D printing, and the main materials used in 3D printing are photosensitive resin and nylon materials, which has a great advantage in making the hand plate with plastic structure for robots.
 
Now small batch production of shaping robots are using the silicon compound mold process.
 
Composite mold can be ABS class, PMMA class material complex mold.
 
Spray oil after polishing.
 
Until in accordance with the requirements of the finished product delivery.
 
If it's metal based robots in small batches.
 
The basic machine plus mainly, about 20-thousands of sets.
 
Therefore, different types of robots with different functions and materials.
 
Do the handboard technology is not the same.
 
If for proofing, can use 3D printing, if for small batch production, can use duplicate mold process manufacturing, at present, robot small batch production is the general trend.
 
This product mass production of robots, do not waste steel die, time is also relatively advantageous.
 
And the quality of production is good, the surface color and internal material quality have met the requirements of customers, the market recognition.
 
The above is the 3D printing robot hand plate model introduced by EasoAR-Soon 3D printing service for your low-cost rapid prototyping analysis, hoping to provide your reference.
 
Zen Master provides one-stop 3D printing service, with more than 10 3D printing machines and 0.05mm precision 3D printing plate mold. Provide more than 200 kinds of materials 0.05mm precision 3D printing mold, 3D printing manual production, 3D building model, 3D printing figure, 3D printing sand table model printing services.
 

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code