The difference between zinc alloy and aluminum alloy|www.easoar-soon.com
Welcome to Easoar-soon/Easoonmade
icon
Industry News

The difference between zinc alloy and aluminum alloy|www.easoar-soon.com

Views : 1051
Author : jett NG
Update time : 2021-05-24 21:44:04

The difference between zinc alloy and aluminum alloy

Zinc alloy is an alloy based on zinc and composed of other elements. Often added alloying elements are aluminum, copper, magnesium, cadmium, lead, titanium and other low temperature zinc alloy. Zinc alloy melting point is low, good liquidity, easy to weld, brazing and plastic processing, corrosion resistance in the atmosphere, waste material is easy to recover and remelting; However, the creep strength is low and the size change is easily caused by natural aging. It is prepared by melting, die casting or pressure machining. According to the manufacturing process can be divided into cast zinc alloy and deformation zinc alloy. It can be used for die-casting instrument, automobile parts shell, electric pole surface galvanized anti-corrosion, boiler water wall pipe hot dip zinc treatment to improve high temperature corrosion resistance, etc.

 Easoon made provides zinc alloy |milled out of zinc alloy  |CNC zinc alloy machining service

Aluminum alloy is based on aluminum alloy general name. The main alloying elements are copper, silicon, magnesium, zinc, manganese, and the secondary alloying elements are nickel, iron, titanium, chromium, lithium, etc. Aluminum alloy is one of the most widely used nonferrous metal structural materials in industry. It is widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry.

 

First, the differences in the die casting process are as follows:

 

1, two kinds of alloy processing molten temperature is different, zinc alloy in more than 400 degrees, aluminum alloy to go to more than 700 degrees.

 

2, processing equipment is different, although called die casting machine, but completely can not be used.

 

3. Different processing technology and parameters.

 

Second, the difference on the product

 

The affinity of zinc alloy and iron is poor, so the die slope can be made very small, generally about 0.5°, and the aluminum alloy die slope is general

Related News
Read More >>
Industry, manufacturing event was launched in Shenzhen/easoonmade/www.easoar-soon.com Industry, manufacturing event was launched in Shenzhen/easoonmade/www.easoar-soon.com
Aug .18.2022
In 2022, it will be held in Shenzhen International Convention and Exhibition Center from 8.15-18, and will carry out metal cutting machine tool exhibition, metal forming machine tool exhibition, robot and automation equipment exhibition, industrial parts.
What software is better at simulating dron flight?Weclome to discusss/easoonmade/easoar-soon.com What software is better at simulating dron flight?Weclome to discusss/easoonmade/easoar-soon.com
Aug .10.2022
What software is better at simulating dron flight?Weclome to discusss/easoonmade/easoar-soon.com
How to help customers save express fee?/easoonmade/www.easoar-soon.com How to help customers save express fee?/easoonmade/www.easoar-soon.com
Aug .09.2022
The express fee for air freight is in the prototype, and the proportion of proofing is relatively large. How to help customers save express fee?/easoonmade/www.easoar-soon.com
​​​​​​​New energy electric vehicle battery shell and motor shell custom processing,custom cnc amchining services/easoonmade/easoar-soon ​​​​​​​New energy electric vehicle battery shell and motor shell custom processing,custom cnc amchining services/easoonmade/easoar-soon
Aug .06.2022
12 years of focus on CNC turning and milling of precision aluminum parts to solve the problems of precision and appearance of parts processing • New energy vehicle motor shell prototype processing • Sensor thermometer precision accessories • Automatic dri