google-site-verification=4pALxJKpi-MqeA3C_XpCFt88OJTRcj42iaToKIVA-Qg
Welcome to Easoar-soon
icon
Industry News

    Which good magnesium alloy processing?

Views : 157
Author : jett NG
Update time : 2021-05-05 16:07:10

    Which good magnesium alloy processing?

 

Dongguan easoonmade co., LTD. As a dedicated CNC precision processing plants, had come into contact with the material is very wide, robot parts, aviation navigation parts in the past two years with magnesium alloy processing, magnesium alloy machining accuracy than aluminum alloy precision increased by more than one order of magnitude, in addition to the need to adopt a new machining method or the new mechanism, Special requirements for workpiece materials, processing equipment, tools, measurement and environmental conditions. The workpiece material should be meticulous and uniform, and be properly disposed to reduce the internal residual stress, to achieve a high dimensional stability, reduce the deformation after processing.

 

Usually used in CNC processing of magnesium alloy grades are: AZ91D, AZ31B, AZ61, magnesium alloy material characteristics are

 

1. Magnesium alloy has a low density but high strength and good rigidity. Among the existing engineering metals, magnesium has a very small density;

 

2. Magnesium alloy has good toughness and strong shock absorption.

 

3. Magnesium alloy is flammable, magnesium element and oxygen element are easy to react, such as CNC cutting heat can not be released in time, it is likely to cause combustion accidents, processing should pay attention to fire prevention.

 

4. The corrosion resistance of magnesium alloy is poor. Magnesium is prone to galvanic corrosion when contacting with different metals and acts as an anode. Easy to oxidize, surface pitting, CNC processing magnesium alloy should pay attention to seal to prevent oxidation.

 

Dongguan Easoonmade Co., Ltd. is a company specializing in providing precision CNC magnesium alloy processing, stainless steel parts, aluminum alloy parts, brass parts, titanium alloy parts and other hardware parts machining for medical equipment, aerospace and navigation equipment, robot parts, photoelectric communication equipment and other enterprises.

 

Any interest or questions can consult dongguan easoonmade co., LTD., there will be a professional online engineer for you 1 to 1 answers.

Related News
Read More >>
The trust of the customer from France from the inquiry to the completion of the order is in the mail The trust of the customer from France from the inquiry to the completion of the order is in the mail
Jul .13.2021
Prototype CNC Machining in UK , USA,France,Canadt,Italy,Austria.Europe,etc
An inquiry was received by email on June 17, 2021, which reads as follows:
Technical analysis of metal surface treatment process Technical analysis of metal surface treatment process
Jun .10.2021
According to the cleaning function and principle: chemical cleaning, physical cleaning, laser cleaning;
Galvanizing is a layer of zinc plated on the surface of metal, alloy or other materials in order to play a beautiful, rust prevention and other roles,
The customer's praise gave us the greatest encouragement|www.easoar-soon.com The customer's praise gave us the greatest encouragement|www.easoar-soon.com
Jun .09.2021
specifically do those optimization management process!
1: Top equipments like:3-5Axis Machining CNC,EDM,SLA, SLS, etc.
2. Optimized the operation scheduling of CNC machining workshop
3, CNC processing workshop strictly according to the scheduling resul
What are the main differences between CNC engraving and CNC milling?|www.easoar-soon.com What are the main differences between CNC engraving and CNC milling?|www.easoar-soon.com
Jun .08.2021
What should we do after the appearance of lines in CNC machining?|www.easoar-soon.com
1. What are the main differences between CNC engraving and CNC milling?
It is easy and convenient to pay and get service on this Website!
We are a mantufacturer specialized inmanufacture in prototyping,Meatal machining,sheet steel protyping for more than 15 years. Especially silicone mold to making the low volume product which helps customer save cost and time!Clicking the arrow of pictures to watch the video which is showing the manufacturing technique!